OKLAHOMA · WELLS · CARTER COUNTY · API 35-019-23960
Wildcat Jim Penn Unit #130
ActiveVertical enhanced recovery injection well
- Operator of record
- Mack Energy Co.
- County
- Carter
A vertical enhanced recovery injection well in Carter County, Oklahoma, operated by Mack Energy Co. OCC status: active.
Spudded May 28, 1990 and drilled to 1,830 ft measured depth.
It has taken 1,691,289 bbl of injected water since January 2011, 97,919 bbl of it in the twelve months through December 2025.
Intent to drill
Open the intent to drill page →- Status
- Approved · OCC: WRA
- Approved
- Mar 29, 1990
- Expires
- Oct 13, 1990
- Operator
- Mack Energy Co.
- Proposed formation
- Cisco, County Line /LM/, Tatums
- Target depth
- 3,000 ft
Wells nearby
Every well with a location on file around this well, in any state, nearest first.
Reported injection
1,691,289 bbl of water injected since Jan 2011. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.
12 months through Dec 2025 97,919 · prior 12 101,358(-3%)
Wildcat Jim Penn Unit #130: Injected water by month.
Well record
- API number
- 35-019-23960
- Location
- C NE SW SE-6-02S-02W · 990 FSL, 990 FWL
- Coordinates
- 34.40769, -97.44509 ↗
- Ground elevation
- 975 ft
- Measured depth
- 1,830 ft
- Intent to drill
- Approved Mar 29, 1990
- Proposed formation
- Cisco, County Line /LM/, Tatums
- Target depth
- 3,000 ft
- Spudded
- May 28, 1990
No oil or gas production is available for this well.
About this data
Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.
Developers: this page as JSON is GET /v1/data/wells/3501923960, documented in the API reference.