OKLAHOMA · WELLS · CARTER COUNTY · API 35-019-25322
Brady #65
ActiveVertical enhanced recovery injection well
- Operator of record
- Kodiak Oil & Gas Inc
- County
- Carter
- Formation
- Deese
A vertical enhanced recovery injection well in Carter County, Oklahoma, operated by Kodiak Oil & Gas Inc. OCC status: active.
Spudded September 23, 2012 and drilled to 2,450 ft measured depth.
Completed in one formation: Deese.
It has taken 1,359,813 bbl of injected water since December 2012, 145,555 bbl of it in the twelve months through December 2025.
Wells nearby
Every well with a location on file around this well, in any state, nearest first.
Reported injection
1,359,813 bbl of water injected since Dec 2012. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.
12 months through Dec 2025 145,555 · prior 12 146,048(0%)
Brady #65: Injected water by month.
Completions
ONE PER FORMATION THE WELL IS COMPLETED IN
| Formation | Status | Perforations, ft | Completed |
|---|---|---|---|
| Deese | Active | 2,062 to 2,128 | Oct 15, 2012 |
Well record
- API number
- 35-019-25322
- Location
- NE SE SW NE-5-02S-02W · 2150 FNL, 1486 FEL
- Coordinates
- 34.41391, -97.42712 ↗
- Ground elevation
- 1,040 ft
- Measured depth
- 2,450 ft
- Perforations
- 2,062 to 2,128 ft
- Intent to drill
- Approved Oct 26, 2012
- Proposed formation
- Cisco, Deese
- Target depth
- 2,499 ft
- Spudded
- Sep 23, 2012
No oil or gas production is available for this well.
About this data
Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.
Developers: this page as JSON is GET /v1/data/wells/3501925322, documented in the API reference.