OKLAHOMA · WELLS · CARTER COUNTY · API 35-019-25715
Brady D #119
ActiveVertical enhanced recovery injection well
- Operator
- Kodiak Oil & Gas Inc
- County
- Carter
- Formation
- Deese
A vertical enhanced recovery injection well in Carter County, Oklahoma, operated by Kodiak Oil & Gas Inc. OCC status: active.
Spudded November 14, 2012 and drilled to 2,484 ft measured depth.
Completed in one formation: Deese.
It has taken 156,732 bbl of injected water since April 2024, 83,627 bbl of it in the twelve months through December 2025.
Wells nearby
Every well with a location on file around this one, in any state, nearest first.
Loading the wells nearby…
Reported injection
156,732 bbl of water injected since Apr 2024. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.
12 months through Dec 2025 83,627
Brady D #119: Injected water by month.
Completions
ONE PER FORMATION THE WELL IS COMPLETED IN
| Formation | Status | Perforations, ft | Completed |
|---|---|---|---|
| Deese | Active · Pumping | 1,728 to 1,856 | Feb 22, 2013 |
Well record
- API number
- 35-019-25715
- Location
- NE NE SE SW-32-01S-02W · 1155 FSL, 2475 FWL
- Coordinates
- 34.42308, -97.43158 ↗
- Ground elevation
- 1,030 ft
- Measured depth
- 2,484 ft
- Perforations
- 1,728 to 1,856 ft
- Intent to drill
- Approved May 30, 2012
- Proposed formation
- Deese, Hoxbar
- Target depth
- 2,499 ft
- Spudded
- Nov 14, 2012
No oil or gas production is available for this well.
About this data
Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.
Developers: this page as JSON is GET /v1/data/wells/3501925715, documented in the API reference.