OKLAHOMA · WELLS · CARTER COUNTY · API 35-019-26369
Rose #1
ActiveVertical disposal (non-commercial) well
- Operator
- Kodiak Oil & Gas Inc
- County
- Carter
- Formation
- Deese
A vertical disposal (non-commercial) well in Carter County, Oklahoma, operated by Kodiak Oil & Gas Inc. OCC status: active.
Spudded July 2, 2020 and drilled to 4,500 ft measured depth.
Completed in one formation: Deese.
It has taken 336,489 bbl of injected water since October 2021, 54,583 bbl of it in the twelve months through December 2025.
Wells nearby
Every well with a location on file around this one, in any state, nearest first.
Loading the wells nearby…
Reported injection
336,489 bbl of water injected since Oct 2021. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.
12 months through Dec 2025 54,583 · prior 12 85,080(-36%)
Rose #1: Injected water by month.
Completions
ONE PER FORMATION THE WELL IS COMPLETED IN
| Formation | Status | Perforations, ft | Completed |
|---|---|---|---|
| Deese | Active | 3,530 to 3,640 | Jul 28, 2021 |
Well record
- API number
- 35-019-26369
- Location
- C NW SE NE-27-04S-02W · 990 FSL, 990 FEL
- Coordinates
- 34.18295, -97.39063 ↗
- Ground elevation
- 889 ft
- Measured depth
- 4,500 ft
- Perforations
- 3,530 to 3,640 ft
- Intent to drill
- Approved Feb 12, 2020
- Proposed formation
- Deese, Hoxbar, Pontotoc
- Target depth
- 4,300 ft
- Spudded
- Jul 2, 2020
No oil or gas production is available for this well.
About this data
Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.
Developers: this page as JSON is GET /v1/data/wells/3501926369, documented in the API reference.