OKLAHOMA · WELLS · COTTON COUNTY · API 35-033-21047
Oklahoma School Land "E" #6
ActiveVertical disposal (non-commercial) well
- Operator
- Bridwell Oil Company
- County
- Cotton
- Formation
- Cisco
A vertical disposal (non-commercial) well in Cotton County, Oklahoma, operated by Bridwell Oil Company. OCC status: active.
Spudded August 20, 1993 and drilled to 1,680 ft measured depth.
Completed in one formation: Cisco.
It has taken 67,593 bbl of injected water since January 2016, 9,033 bbl of it in the twelve months through December 2025.
Wells nearby
Every well with a location on file around this well, in any state, nearest first.
Reported injection
67,593 bbl of water injected since Jan 2016. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.
12 months through Dec 2025 9,033 · prior 12 7,200(+25%)
Oklahoma School Land "E" #6: Injected water by month.
Completions
ONE PER FORMATION THE WELL IS COMPLETED IN
| Formation | Status | Perforations, ft | Completed |
|---|---|---|---|
| Cisco | Active | 1,616 to 1,621 | Dec 1, 2015 |
Well record
- API number
- 35-033-21047
- Location
- SW NW NW NW-16-03S-11W · 1992 FSL, 219 FWL
- Coordinates
- 34.30242, -98.36492 ↗
- Ground elevation
- 1,031 ft
- Measured depth
- 1,680 ft
- Perforations
- 1,616 to 1,621 ft
- Intent to drill
- Approved Jun 30, 1993
- Proposed formation
- Cisco
- Target depth
- 1,800 ft
- Spudded
- Aug 20, 1993
No oil or gas production is available for this well.
About this data
Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.
Developers: this page as JSON is GET /v1/data/wells/3503321047, documented in the API reference.