OKLAHOMA · WELLS · CREEK COUNTY · API 35-037-20821

Katie Brown (K Brown E-40A #6) #6E

ActiveVertical enhanced recovery injection well

Operator of record
Berexco LLC
County
Creek

A vertical enhanced recovery injection well in Creek County, Oklahoma, operated by Berexco LLC. OCC status: active.

Spudded November 4, 1969 and drilled to 2,820 ft measured depth.

It has taken 5,207,998 bbl of injected water since January 2011, 152,706 bbl of it in the twelve months through December 2025.

Wells nearby

Every well with a location on file around this well, in any state, nearest first.

Loading the map…

Open the full map →

Reported injection

5,207,998 bbl of water injected since Jan 2011. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown. This well shows nothing for 2012. There is a data discrepancy in the 2024 injection record that is still under review: part of that year's volume is not matched to its wells. Statewide and operator totals for 2024 include it; some wells and counties show 2024 as under review instead of a figure.

12 months through Dec 2025 152,706 · prior 12 324,819(-53%)

020K40K60K201120122013201420152016201720182019202020212022202320242025UNDER REVIEW

Katie Brown (K Brown E-40A #6) #6E: Injected water by month.

Well record

API number
35-037-20821
Location
SE NW NE SW-9-17N-07E · 2040 FSL, 1930 FWL
Measured depth
2,820 ft
Spudded
Nov 4, 1969

No oil or gas production is available for this well.

About this data

Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.

Developers: this page as JSON is GET /v1/data/wells/3503720821, documented in the API reference.