OKLAHOMA · WELLS · CREEK COUNTY · API 35-037-28723
Walker #1
ActiveVertical disposal (non-commercial) well
- Operator
- Cartledge Energy LLC
- County
- Creek
- Formation
- Dutcher
A vertical disposal (non-commercial) well in Creek County, Oklahoma, operated by Cartledge Energy LLC. OCC status: active.
Spudded December 13, 2006 and drilled to 2,870 ft measured depth.
Completed in one formation: Dutcher.
It has taken 262,065 bbl of injected water since January 2011, 17,553 bbl of it in the twelve months through December 2025.
Wells nearby
Every well with a location on file around this one, in any state, nearest first.
Loading the wells nearby…
Reported injection
262,065 bbl of water injected since Jan 2011. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.
12 months through Dec 2025 17,553 · prior 12 12,810(+37%)
Walker #1: Injected water by month.
Completions
ONE PER FORMATION THE WELL IS COMPLETED IN
| Formation | Status | Perforations, ft | Completed |
|---|---|---|---|
| Dutcher | Active · Pumping | 2,780 to 2,818 | Feb 8, 2007 |
Well record
- API number
- 35-037-28723
- Location
- C N2 SW NE-32-14N-10E
- Coordinates
- 35.64869, -96.27007 ↗
- Ground elevation
- 750 ft
- Measured depth
- 2,870 ft
- Perforations
- 2,780 to 2,818 ft
- Intent to drill
- Approved Sep 6, 2006
- Proposed formation
- Bartlesville, Dutcher
- Target depth
- 2,800 ft
- Spudded
- Dec 13, 2006
No oil or gas production is available for this well.
About this data
Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.
Developers: this page as JSON is GET /v1/data/wells/3503728723, documented in the API reference.