OKLAHOMA · WELLS · GARFIELD COUNTY · API 35-047-01704

Bangerter #2

ActiveVertical enhanced recovery injection well

Operator of record
M M Energy Inc
County
Garfield

A vertical enhanced recovery injection well in Garfield County, Oklahoma, operated by M M Energy Inc. OCC status: active.

Spudded August 26, 2011 and drilled to 5,078 ft measured depth.

Completed in one formation: Mississippi Chat.

It has taken 227,866 bbl of injected water since October 2016, 28,800 bbl of it in the twelve months through December 2025.

Wells nearby

Every well with a location on file around this well, in any state, nearest first.

Loading the map…

Open the full map →

Reported injection

227,866 bbl of water injected since Oct 2016. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.

12 months through Dec 2025 28,800 · prior 12 28,800(+0%)

01K2K3K201720182019202020212022202320242025

Bangerter #2: Injected water by month.

Completions

ONE PER FORMATION THE WELL IS COMPLETED IN

FormationStatusPerforations, ftCompleted
Mississippi ChatActive · Pumping5,010 to 5,016Sep 13, 2011

Well record

API number
35-047-01704
Location
C NE SE NE-27-22N-04W · 990 FSL, 2310 FWL
Ground elevation
1,121 ft
Measured depth
5,078 ft
Perforations
5,010 to 5,016 ft
Intent to drill
Approved Sep 7, 2011
Proposed formation
Belveal, Mississippi Chat, Oswego
Target depth
5,077 ft
Spudded
Aug 26, 2011

No oil or gas production is available for this well.

About this data

Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.

Developers: this page as JSON is GET /v1/data/wells/3504701704, documented in the API reference.