OKLAHOMA · WELLS · GARVIN COUNTY · API 35-049-01368

NE Purdy Springer Sand Unit a (Denson "C"1) #q-22

ActiveVertical enhanced recovery injection well

County
Garvin
Formation
Hart

A vertical enhanced recovery injection well in Garvin County, Oklahoma, operated by Daylight Petroleum LLC. OCC status: active.

Spudded September 26, 1953 and drilled to 9,751 ft measured depth.

Completed in 2 formations: Hart, Springer.

It has taken 1,427,876 bbl of injected water since January 2011, 272,911 bbl of it in the twelve months through December 2025.

Wells nearby

Every well with a location on file around this well, in any state, nearest first.

Loading the map…

Open the full map →

Reported injection

1,427,876 bbl of water injected since Jan 2011, and 259,699 Mcf of gas. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.

12 months through Dec 2025 272,911 · prior 12 294,922(-7%)

020K40K60K20152016201720182019202020212022202320242025

NE Purdy Springer Sand Unit a (Denson "C"1) #q-22: Injected water by month.

Completions

ONE PER FORMATION THE WELL IS COMPLETED IN

FormationStatusPerforations, ftCompleted
HartActive8,671 to 9,620Apr 15, 2009
SpringerActive9,520 to 9,620Apr 15, 2009

Well record

API number
35-049-01368
Location
C SW NW-18-03N-03W · 660 FSL, 660 FWL
Ground elevation
1,114 ft
Measured depth
9,751 ft
Perforations
8,671 to 9,620 ft
Spudded
Sep 26, 1953

No oil or gas production is available for this well.

About this data

Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.

Developers: this page as JSON is GET /v1/data/wells/3504901368, documented in the API reference.