OKLAHOMA · WELLS · GARVIN COUNTY · API 35-049-30186
Merrick Trust (Ftu 5-1) #1
ActiveVertical simultaneous injection well
- Operator
- L.E. Jones Operating, Inc.
- County
- Garvin
- Formation
- Pontotoc
A vertical simultaneous injection well in Garvin County, Oklahoma, operated by L.E. Jones Operating, Inc. OCC status: active.
Spudded January 20, 1965 and drilled to 7,720 ft measured depth.
Completed in 2 formations: Pontotoc, Tussy.
It has taken 181,672 bbl of injected water since January 2011, 15,546 bbl of it in the twelve months through December 2025.
Wells nearby
Every well with a location on file around this one, in any state, nearest first.
Loading the wells nearby…
Reported injection
181,672 bbl of water injected since Jan 2011. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.
12 months through Dec 2025 15,546 · prior 12 10,339(+50%)
Merrick Trust (Ftu 5-1) #1: Injected water by month.
Completions
ONE PER FORMATION THE WELL IS COMPLETED IN
| Formation | Status | Perforations, ft | Completed |
|---|---|---|---|
| Pontotoc | Active | 1,320 to 1,480 | Mar 25, 2009 |
| Tussy | Active | 7,638 to 7,658 | Mar 25, 2009 |
Well record
- API number
- 35-049-30186
- Location
- C SE NW-27-02N-03W · 660 FSL, 1980 FWL
- Coordinates
- 34.61772, -97.50377 ↗
- Ground elevation
- 1,057 ft
- Measured depth
- 7,720 ft
- Perforations
- 1,320 to 7,658 ft
- Spudded
- Jan 20, 1965
No oil or gas production is available for this well.
About this data
Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.
Developers: this page as JSON is GET /v1/data/wells/3504930186, documented in the API reference.