OKLAHOMA · WELLS · GARVIN COUNTY · API 35-049-39743

NE Purdy Springer Sand Unit a #h-15

ActiveVertical enhanced recovery injection well

Operator of record
Daylight Petroleum LLC
County
Garvin
Formation
Springer

A vertical enhanced recovery injection well in Garvin County, Oklahoma, operated by Daylight Petroleum LLC. OCC status: active.

Spudded December 31, 1953 and drilled to 10,200 ft measured depth.

Completed in 2 formations: Hart, Springer.

It has taken 363,226 bbl of injected water since January 2011, 77,937 bbl of it in the twelve months through December 2025.

Wells nearby

Every well with a location on file around this well, in any state, nearest first.

Loading the map…

Open the full map →

Reported injection

363,226 bbl of water injected since Jan 2011, and 180,749 Mcf of gas. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.

12 months through Dec 2025 77,937 · prior 12 19,417(+301%)

010K20K30K2019202020212022202320242025

NE Purdy Springer Sand Unit a #h-15: Injected water by month.

Completions

ONE PER FORMATION THE WELL IS COMPLETED IN

FormationStatusPerforations, ftCompleted
HartActive8,625 to 8,654Nov 1, 2018
SpringerActive9,875 to 9,938Nov 1, 2018

Well record

API number
35-049-39743
Location
C NE SE-3-03N-04W · 1980 FSL, 1980 FWL
Ground elevation
1,137 ft
Measured depth
10,200 ft
Perforations
8,625 to 9,938 ft
Spudded
Dec 31, 1953

No oil or gas production is available for this well.

About this data

Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.

Developers: this page as JSON is GET /v1/data/wells/3504939743, documented in the API reference.