OKLAHOMA · WELLS · GRADY COUNTY · API 35-051-23728
Virgil Dougherty #4
Dry holeDirectional dry hole wellOCC status: Active
- Operator of record
- Red Rocks Oil & Gas Operating LLC
- County
- Grady
- Formation
- McLish
A directional dry hole well in Grady County, Oklahoma, operated by Red Rocks Oil & Gas Operating LLC. OCC status: active.
Spudded October 14, 2013 and drilled to 13,671 ft measured depth.
Completed in 3 formations: Bromide, McLish, Tulip Creek.
Intent to drill
Open the intent to drill page →- Status
- Approved · OCC: WRA
- Approved
- Oct 7, 2013
- Expires
- Apr 7, 2014
- Wellbore
- Directional
- Proposed formation
- Bois D'arc, Bromide, Chimney Hill, Sycamore, Tulip Creek
- Target depth
- 13,675 ft
Wells nearby
Every well with a location on file around this well, in any state, nearest first.
Completions
ONE PER FORMATION THE WELL IS COMPLETED IN
| Formation | Status | Perforations, ft | Completed |
|---|---|---|---|
| Bromide | Dry hole | 12,856 to 13,036 | Feb 22, 2014 |
| McLish | Dry hole | 13,266 to 13,470 | Feb 22, 2014 |
| Tulip Creek | Dry hole | 13,108 to 13,230 | Feb 22, 2014 |
Well record
- API number
- 35-051-23728
- Location
- SE NW NE SW-1-04N-05W · 2210 FSL, 1702 FWL
- Coordinates
- 34.84691, -97.68004 ↗
- Ground elevation
- 989 ft
- Measured depth
- 13,671 ft
- Perforations
- 12,856 to 13,470 ft
- Intent to drill
- Approved Oct 7, 2013
- Proposed formation
- Bois D'arc, Bromide, Chimney Hill, Sycamore, Tulip Creek
- Target depth
- 13,675 ft
- Spudded
- Oct 14, 2013
No oil or gas production is available for this well.
About this data
Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month. No oil or gas production is available for Oklahoma. Nothing is estimated.
Developers: this page as JSON is GET /v1/data/wells/3505123728, documented in the API reference.