OKLAHOMA · WELLS · GRANT COUNTY · API 35-053-23011
Alice #32-1 SWD
ActiveVertical disposal (non-commercial) well
- Operator
- Contango Resources LLC
- County
- Grant
- Formation
- Arbuckle
A vertical disposal (non-commercial) well in Grant County, Oklahoma, operated by Contango Resources LLC. OCC status: active.
Spudded April 16, 2012 and drilled to 7,880 ft measured depth.
Completed in one formation: Arbuckle.
It has taken 4,757,620 bbl of injected water since September 2012, 180,688 bbl of it in the twelve months through December 2025.
Wells nearby
Every well with a location on file around this well, in any state, nearest first.
Reported injection
4,757,620 bbl of water injected since Sep 2012. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.
12 months through Dec 2025 180,688 · prior 12 188,388(-4%)
Alice #32-1 SWD: Injected water by month.
Completions
ONE PER FORMATION THE WELL IS COMPLETED IN
| Formation | Status | Perforations, ft | Completed |
|---|---|---|---|
| Arbuckle | Disposal | 6,535 to 7,880 | Jun 4, 2012 |
Well record
- API number
- 35-053-23011
- Location
- NW NW NW NW-32-25N-05W · 233 FNL, 183 FWL
- Coordinates
- 36.60721, -97.76738 ↗
- Ground elevation
- 1,085 ft
- Measured depth
- 7,880 ft
- Perforations
- 6,535 to 7,880 ft
- Intent to drill
- Approved Apr 3, 2012
- Proposed formation
- Arbuckle
- Target depth
- 7,900 ft
- Spudded
- Apr 16, 2012
No oil or gas production is available for this well.
About this data
Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.
Developers: this page as JSON is GET /v1/data/wells/3505323011, documented in the API reference.