OKLAHOMA · WELLS · GRANT COUNTY · API 35-053-23085

Frieouf #1-7 SWD

State fund plugging listVertical terminated uic well well

County
Grant

A vertical terminated uic well well in Grant County, Oklahoma, operated by L & L Smith Energy Corporation. OCC status: state fund plugging list.

Spudded July 26, 2012 and drilled to 6,860 ft measured depth.

It has taken 5,319,651 bbl of injected water since September 2013.

Wells nearby

Every well with a location on file around this well, in any state, nearest first.

Loading the map…

Open the full map →

Reported injection

5,319,651 bbl of water injected since Sep 2013. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown. This well shows nothing for 2015. There is a data discrepancy in the 2024 injection record that is still under review: part of that year's volume is not matched to its wells. Statewide and operator totals for 2024 include it; some wells and counties show 2024 as under review instead of a figure.

12 months through Dec 2025 0 · prior 12 0

0200K400K600K201420152016201720182019202020212022202320242025UNDER REVIEW

Frieouf #1-7 SWD: Injected water by month.

Well record

API number
35-053-23085
Location
SE NW SW SW-7-28N-04W · 708 FSL, 478 FWL
Ground elevation
1,196 ft
Measured depth
6,860 ft
Intent to drill
Approved Jul 17, 2012
Proposed formation
Arbuckle Dolo
Target depth
6,860 ft
Spudded
Jul 26, 2012

No oil or gas production is available for this well.

About this data

Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.

Developers: this page as JSON is GET /v1/data/wells/3505323085, documented in the API reference.