OKLAHOMA · WELLS · KINGFISHER COUNTY · API 35-073-24778

Suzanne #1 SWD

PluggedVertical terminated uic well wellOCC status: Plugged and abandoned

Operator of record
Ovintiv USA Inc
Formation
Douglas

A vertical terminated uic well well in Kingfisher County, Oklahoma, operated by Ovintiv USA Inc. OCC status: plugged and abandoned.

Spudded June 8, 2012 and drilled to 13,400 ft measured depth.

Completed in 2 formations: Douglas, Shawnee.

It has taken 32,357,470 bbl of injected water since November 2012.

Wells nearby

Every well with a location on file around this well, in any state, nearest first.

Loading the map…

Open the full map →

Reported injection

32,357,470 bbl of water injected since Nov 2012. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.

12 months through Dec 2025 0 · prior 12 0

0500K1M2013201420152016201720182019202020212022202320242025

Suzanne #1 SWD: Injected water by month.

Completions

ONE PER FORMATION THE WELL IS COMPLETED IN

FormationStatusPerforations, ftCompleted
DouglasPlugged5,182 to 6,140Oct 22, 2015
ShawneePlugged4,622 to 5,130Oct 22, 2015

Well record

API number
35-073-24778
Location
NW NE SE SE-35-15N-09W · 1200 FSL, 2140 FWL
Ground elevation
1,220 ft
Measured depth
13,400 ft
Perforations
4,622 to 6,140 ft
Intent to drill
Approved Apr 16, 2015
Proposed formation
Douglas, Shawnee
Target depth
13,400 ft
Spudded
Jun 8, 2012

No oil or gas production is available for this well.

About this data

Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.

Developers: this page as JSON is GET /v1/data/wells/3507324778, documented in the API reference.