OKLAHOMA · WELLS · LOGAN COUNTY · API 35-083-23357
Miller #1-23 SWD
ActiveVertical disposal (non-commercial) well
- Operator
- Cottonmouth SWD LLC
- County
- Logan
- Formation
- Endicott
A vertical disposal (non-commercial) well in Logan County, Oklahoma, operated by Cottonmouth SWD LLC. OCC status: active.
Spudded October 8, 1996 and drilled to 4,959 ft measured depth.
Completed in one formation: Endicott.
It has taken 2,433,546 bbl of injected water since March 2013, 50 bbl of it in the twelve months through December 2025.
Wells nearby
Every well with a location on file around this one, in any state, nearest first.
Loading the wells nearby…
Reported injection
2,433,546 bbl of water injected since Mar 2013. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.
12 months through Dec 2025 50 · prior 12 906(-94%)
Miller #1-23 SWD: Injected water by month.
Completions
ONE PER FORMATION THE WELL IS COMPLETED IN
| Formation | Status | Perforations, ft | Completed |
|---|---|---|---|
| Endicott | Active | 3,500 to 3,630 | Feb 20, 2002 |
Well record
- API number
- 35-083-23357
- Location
- C SW SW-23-17N-03W · 660 FSL, 660 FWL
- Coordinates
- 35.92939, -97.49481 ↗
- Ground elevation
- 1,049 ft
- Measured depth
- 4,959 ft
- Perforations
- 3,500 to 3,630 ft
- Intent to drill
- Approved Nov 9, 2012
- Proposed formation
- Endicott
- Target depth
- 4,950 ft
- Spudded
- Oct 8, 1996
No oil or gas production is available for this well.
About this data
Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.
Developers: this page as JSON is GET /v1/data/wells/3508323357, documented in the API reference.