OKLAHOMA · WELLS · LOVE COUNTY · API 35-085-00539

Greenville Unit (Conrad B #2) #53

ActiveVertical enhanced recovery injection well

County
Love

A vertical enhanced recovery injection well in Love County, Oklahoma, operated by Southern Oklahoma Production. OCC status: active.

Spudded February 16, 1987 and drilled to 5,349 ft measured depth.

It has taken 27,882 bbl of injected water since January 2011, 1,967 bbl of it in the twelve months through December 2025.

Wells nearby

Every well with a location on file around this one, in any state, nearest first.

Loading the wells nearby…

Open the full map →

Reported injection

27,882 bbl of water injected since Jan 2011. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown. This well shows nothing for 2019. There is a data discrepancy in the 2024 injection record that is still under review: part of that year's volume is not matched to its wells. Statewide and operator totals for 2024 include it; some wells and counties show 2024 as under review instead of a figure.

12 months through Dec 2025 1,967 · prior 12 2,170(-9%)

0100200300201120122013201420152016201720182019202020212022202320242025UNDER REVIEW

Greenville Unit (Conrad B #2) #53: Injected water by month.

Well record

API number
35-085-00539
Location
C SE SW NE-29-06S-02E · 330 FSL, 990 FWL
Ground elevation
712 ft
Measured depth
5,349 ft
Spudded
Feb 16, 1987

No oil or gas production is available for this well.

About this data

Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.

Developers: this page as JSON is GET /v1/data/wells/3508500539, documented in the API reference.