OKLAHOMA · WELLS · PAYNE COUNTY · API 35-119-23976
West Perkins SWD #1
ActiveVertical disposal (commercial) well
- Operator
- Willman Operating LLC
- County
- Payne
- Formation
- 2ND Wilcox
A vertical disposal (commercial) well in Payne County, Oklahoma, operated by Willman Operating LLC. OCC status: active.
Spudded November 30, 2012 and drilled to 6,900 ft measured depth.
Completed in one formation: 2ND Wilcox.
It has taken 2,797,640 bbl of injected water since February 2013, 128,900 bbl of it in the twelve months through December 2025.
Wells nearby
Every well with a location on file around this one, in any state, nearest first.
Loading the wells nearby…
Reported injection
2,797,640 bbl of water injected since Feb 2013. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.
12 months through Dec 2025 128,900 · prior 12 100,500(+28%)
West Perkins SWD #1: Injected water by month.
Completions
ONE PER FORMATION THE WELL IS COMPLETED IN
| Formation | Status | Perforations, ft | Completed |
|---|---|---|---|
| 2ND Wilcox | Active | 4,808 to 4,920 | Jun 26, 2017 |
Well record
- API number
- 35-119-23976
- Location
- C NW NW NW-12-17N-02E · 330 FNL, 330 FWL
- Coordinates
- 35.96997, -97.04994 ↗
- Measured depth
- 6,900 ft
- Perforations
- 4,808 to 4,920 ft
- Intent to drill
- Approved Oct 5, 2012
- Proposed formation
- Arbuckle
- Target depth
- 8,000 ft
- Spudded
- Nov 30, 2012
No oil or gas production is available for this well.
About this data
Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.
Developers: this page as JSON is GET /v1/data/wells/3511923976, documented in the API reference.