OKLAHOMA · WELLS · SEMINOLE COUNTY · API 35-133-20466

Bowlegs #2

ActiveVertical simultaneous injection well

County
Seminole
Formation
Tulip Creek

A vertical simultaneous injection well in Seminole County, Oklahoma, operated by Mesa Exploration Company Inc. OCC status: active.

Spudded November 8, 1970 and drilled to 4,427 ft measured depth.

Completed in 4 formations: McClish, Oil Creek, Tulip Creek, Viola.

It has taken 534,000 bbl of injected water since July 2022, 162,000 bbl of it in the twelve months through December 2025.

Wells nearby

Every well with a location on file around this one, in any state, nearest first.

Loading the wells nearby…

Open the full map →

Reported injection

534,000 bbl of water injected since Jul 2022. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.

12 months through Dec 2025 162,000 · prior 12 162,000(+0%)

05K10K15K202320242025

Bowlegs #2: Injected water by month.

Completions

ONE PER FORMATION THE WELL IS COMPLETED IN

FormationStatusPerforations, ftCompleted
McClishActive · Pumping4,230 to 4,308Mar 3, 2021
Oil CreekActive · Pumping4,316 to 4,404Mar 3, 2021
Tulip CreekActive · Pumping4,040 to 4,224Mar 3, 2021
ViolaActive · Pumping3,770 to 3,772Mar 3, 2021

Well record

API number
35-133-20466
Location
SW SE SE-26-09N-06E
Ground elevation
850 ft
Measured depth
4,427 ft
Perforations
3,770 to 4,404 ft
Spudded
Nov 8, 1970

No oil or gas production is available for this well.

About this data

Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.

Developers: this page as JSON is GET /v1/data/wells/3513320466, documented in the API reference.