OKLAHOMA · WELLS · STEPHENS COUNTY · API 35-137-02361

Ara Pool Spring Sand Unit (Edwards Heirs 3) #16-3

ActiveVertical enhanced recovery injection well

County
Stephens
Formation
Springer

A vertical enhanced recovery injection well in Stephens County, Oklahoma, operated by Sparks Resources Inc. OCC status: active.

Spudded May 6, 1951 and drilled to 5,402 ft measured depth.

Completed in one formation: Springer.

It has taken 421,713 bbl of injected water since June 2013, 3,600 bbl of it in the twelve months through December 2025.

Wells nearby

Every well with a location on file around this one, in any state, nearest first.

Loading the wells nearby…

Open the full map →

Reported injection

421,713 bbl of water injected since Jun 2013. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.

12 months through Dec 2025 3,600 · prior 12 36,300(-90%)

05K10K201420152016201720182019202020212022202320242025

Ara Pool Spring Sand Unit (Edwards Heirs 3) #16-3: Injected water by month.

Completions

ONE PER FORMATION THE WELL IS COMPLETED IN

FormationStatusPerforations, ftCompleted
SpringerActive5,202 to 5,216Mar 26, 2012

Well record

API number
35-137-02361
Location
NE NW NE-4-01S-04W
Ground elevation
976 ft
Measured depth
5,402 ft
Perforations
5,202 to 5,216 ft
Intent to drill
Approved Aug 16, 2011
Proposed formation
Springer
Target depth
5,402 ft
Spudded
May 6, 1951

No oil or gas production is available for this well.

About this data

Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.

Developers: this page as JSON is GET /v1/data/wells/3513702361, documented in the API reference.