OKLAHOMA · WELLS · STEPHENS COUNTY · API 35-137-02800
North Alma Penn Unit (Pressgrove-Miller 2) #57
ActiveVertical enhanced recovery injection well
- Operator of record
- Mack Energy Co.
- County
- Stephens
A vertical enhanced recovery injection well in Stephens County, Oklahoma, operated by Mack Energy Co. OCC status: active.
Spudded January 3, 1950 and drilled to 5,773 ft measured depth.
It has taken 1,656,087 bbl of injected water since January 2011, 144,301 bbl of it in the twelve months through December 2025.
Intent to drill
Open the intent to drill page →- Status
- Approved · OCC: WRA
- Approved
- Jan 30, 2001
- Expires
- Jul 30, 2001
- Operator
- Mack Energy Co.
- Proposed formation
- Pennsylvanian SD
- Target depth
- 5,465 ft
Wells nearby
Every well with a location on file around this well, in any state, nearest first.
Reported injection
1,656,087 bbl of water injected since Jan 2011. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.
12 months through Dec 2025 144,301 · prior 12 126,518(+14%)
North Alma Penn Unit (Pressgrove-Miller 2) #57: Injected water by month.
Well record
- API number
- 35-137-02800
- Location
- SE NW NW-15-01S-04W
- Coordinates
- 34.47542, -97.61190 ↗
- Ground elevation
- 960 ft
- Measured depth
- 5,773 ft
- Intent to drill
- Approved Jan 30, 2001
- Proposed formation
- Pennsylvanian SD
- Target depth
- 5,465 ft
- Spudded
- Jan 3, 1950
No oil or gas production is available for this well.
About this data
Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.
Developers: this page as JSON is GET /v1/data/wells/3513702800, documented in the API reference.