OKLAHOMA · WELLS · STEPHENS COUNTY · API 35-137-26999
School Land #sl-57
ActiveVertical enhanced recovery injection well
- Operator
- Wildhorse Operating Company
- County
- Stephens
- Formation
- Loco
A vertical enhanced recovery injection well in Stephens County, Oklahoma, operated by Wildhorse Operating Company. OCC status: active.
Spudded September 18, 2014 and drilled to 1,206 ft measured depth.
Completed in one formation: Loco.
It has taken 2,629,705 bbl of injected water since January 2018, 281,164 bbl of it in the twelve months through December 2025.
Wells nearby
Every well with a location on file around this well, in any state, nearest first.
Reported injection
2,629,705 bbl of water injected since Jan 2018. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.
12 months through Dec 2025 281,164 · prior 12 18,225
School Land #sl-57: Injected water by month.
Completions
ONE PER FORMATION THE WELL IS COMPLETED IN
| Formation | Status | Perforations, ft | Completed |
|---|---|---|---|
| Loco | Active | 817 to 856 | Oct 28, 2014 |
Well record
- API number
- 35-137-26999
- Location
- S2 S2 SW NW-14-03S-05W · 2313 FNL, 660 FWL
- Coordinates
- 34.29736, -97.70017 ↗
- Ground elevation
- 914 ft
- Measured depth
- 1,206 ft
- Perforations
- 817 to 856 ft
- Intent to drill
- Approved Jul 15, 2014
- Proposed formation
- Loco
- Target depth
- 1,200 ft
- Spudded
- Sep 18, 2014
No oil or gas production is available for this well.
About this data
Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.
Developers: this page as JSON is GET /v1/data/wells/3513726999, documented in the API reference.