OKLAHOMA · WELLS · TEXAS COUNTY · API 35-139-24516

Hovey Morrow Unit #6-23

ActiveVertical enhanced recovery injection well

County
Texas
Formation
Morrow

A vertical enhanced recovery injection well in Texas County, Oklahoma, operated by Breitburn Operating LP. OCC status: active.

Spudded May 25, 2012 and drilled to 6,470 ft measured depth.

Completed in one formation: Morrow.

It has taken 472,118 bbl of injected water since September 2012, 78,025 bbl of it in the twelve months through December 2025.

Wells nearby

Every well with a location on file around this one, in any state, nearest first.

Loading the wells nearby…

Open the full map →

Reported injection

472,118 bbl of water injected since Sep 2012, and 412,546 Mcf of gas. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.

12 months through Dec 2025 78,025 · prior 12 102,022(-24%)

010K20K30K2013201420152016201720182019202020212022202320242025

Hovey Morrow Unit #6-23: Injected water by month.

Completions

ONE PER FORMATION THE WELL IS COMPLETED IN

FormationStatusPerforations, ftCompleted
MorrowActive6,152 to 6,170Aug 16, 2012

Well record

API number
35-139-24516
Location
SE NW NE SE-4-05N-13E · 2030 FSL, 682 FEL
Ground elevation
3,366 ft
Measured depth
6,470 ft
Perforations
6,152 to 6,170 ft
Intent to drill
Approved Sep 21, 2011
Proposed formation
Morrow SD
Target depth
6,700 ft
Spudded
May 25, 2012

No oil or gas production is available for this well.

About this data

Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.

Developers: this page as JSON is GET /v1/data/wells/3513924516, documented in the API reference.