OKLAHOMA · WELLS · TEXAS COUNTY · API 35-139-35955

Hovey Morrow Unit (Stewart B2) #32-2

ActiveVertical enhanced recovery injection well

County
Texas
Formation
Morrow Sand

A vertical enhanced recovery injection well in Texas County, Oklahoma, operated by Breitburn Operating LP. OCC status: active.

Spudded November 1, 2011 and drilled to 6,675 ft measured depth.

Completed in one formation: Morrow Sand.

It has taken 819,984 bbl of injected water since September 2012, 199,833 bbl of it in the twelve months through December 2025.

Wells nearby

Every well with a location on file around this one, in any state, nearest first.

Loading the wells nearby…

Open the full map →

Reported injection

819,984 bbl of water injected since Sep 2012, and 2,114,332 Mcf of gas. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown. This well shows nothing for 2013. There is a data discrepancy in the 2024 injection record that is still under review: part of that year's volume is not matched to its wells. Statewide and operator totals for 2024 include it; some wells and counties show 2024 as under review instead of a figure.

12 months through Dec 2025 199,833 · prior 12 337,574(-41%)

020K40K60K20152016201720182019202020212022202320242025

Hovey Morrow Unit (Stewart B2) #32-2: Injected water by month.

Completions

ONE PER FORMATION THE WELL IS COMPLETED IN

FormationStatusPerforations, ftCompleted
Morrow SandActive6,152 to 6,236Feb 1, 2012

Well record

API number
35-139-35955
Location
NE SW SE NE-21-05N-13E · 1983 FNL, 661 FEL
Ground elevation
3,353 ft
Measured depth
6,675 ft
Perforations
6,152 to 6,236 ft
Intent to drill
Approved Aug 11, 2011
Proposed formation
Morrow SD
Target depth
6,775 ft
Spudded
Nov 1, 2011

No oil or gas production is available for this well.

About this data

Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.

Developers: this page as JSON is GET /v1/data/wells/3513935955, documented in the API reference.