WYOMING · WELLS · SUBLETTE COUNTY · API 49-035-31362

Stewart Point 3C1-8D

Permitted, not spuddedDirectional gas wellWOGCC status: Permit to Drill

Permit operator
Purewest Resources Inc
County
Sublette

A directional gas well in Sublette County, Wyoming. WOGCC status: permit to drill.

Its APD was approved on August 26, 2026 for a target depth of 15,058 ft; no spud date is on file.

0
bbl oil, 12 months through Aug 2026
0
Mcf gas, same 12 months
0
bbl produced water, same 12 months
0
bbl oil, lifetime · 0 Mcf gas
Status
Approved · WOGCC: Active Permit
Received
Jun 12, 2026
Approved
Aug 26, 2026
Wellbore
Directional
Proposed formation
Lance-Ericson
Target depth
15,058 ft
Proposed bottom hole
42.84985, -109.89373 ↗

2 APDs on file for this well, newest first

ApprovedReceivedOperatorStatusFormationTarget depth
Aug 26, 2026Jun 12, 2026Purewest Resources IncApprovedActive PermitLance-Ericson15,058 ft
Jun 24, 2024Apr 29, 2024Purewest Resources IncApprovedExpired PermitLance15,058 ft

Wells nearby

Every well with a location on file around this well, in any state, nearest first.

Loading the map…

Open the full map →

Formation tops nearby

Well record

API number
49-035-31362
Location
SE SE 6-33N-109W · 1211 FSL, 514 FEL
Measured depth
15,830 ft
Total depth
15,058 ft
Land
Federal
Basin, as WOGCC files it
Greater Green River Basin
APD
Approved Aug 26, 2026
Proposed formation
Lance-Ericson
Target depth
15,058 ft

About this data

Wyoming Oil and Gas Conservation Commission (WOGCC), from its public database extracts. Status and type are in WOGCC's own words. Production and injection are what operators filed on form 2, by well and month; twelve-month figures end in Aug 2026, the last month whose filings are in. Locations are from the well's location plat and are approximate. The Commission's production file names each well's current operator on every month, so an operator's figures are those of the wells it operates today. Nothing is estimated.

Developers: this page as JSON is GET /v1/data/wells/4903531362, documented in the API reference.