TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 4.7 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,000-0-2,000-4,000-6,000SUBSEA FTA2,621 FT ELB2,584 FT ELSpraberrySpraberryStrawnStrawnMississippianMississippian

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ACR 'G' Tract 2 #1402R
  • BLMT #1
FormationAB
Santa Rosa-Gau Protection—2,274 MD 310
Santa Rosa - Gau Protection—2,274 MD 310
Rustler-Gau Protection—1,484 MD 1,100
Rustler - Gau Protection—1,484 MD 1,100
Yates—1,024 MD 1,560
San Andres—94 MD 2,490
San Andres - High Flows, H2S, Co—94 MD 2,490
Leonard—-2,281 MD 4,865LEONARD LIME
Base Lower Clearfork-2,865 MD 5,486—
Base Clearfork-2,865 MD 5,486—
Clearfork-2,865 MD 5,486—
Spraberry-3,501 MD 6,122TOP LOWER SPRABERRY-2,696 MD 5,280
Lower Clearfork-3,501 MD 6,122—
Top Lower Clearfork-3,501 MD 6,122—
Dean—-3,666 MD 6,250
Wolfcamp—-4,292 MD 6,876
Wolfcamp - Strong Water Flows—-4,292 MD 6,876
Strawn-3,642 MD 6,263-5,488 MD 8,072
Pennsylvania—-5,488 MD 8,072
Pennsylvanian—-5,488 MD 8,072
Mississippian-6,022 MD 8,643-5,820 MD 8,404

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.