TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,000-0-2,000-4,000-6,000SUBSEA FTA2,859 FT ELB2,839 FT ELYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan Andres

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AConnell, W.E. NCT-7 #39
  • BWest Jordan Unit #508
FormationAB
Rustler—2,014 MD 825
Santa Rosa1,509 MD 1,350SANTA ROSA BASE—
Yates859 MD 2,000770 MD 2,069
Queen-141 MD 3,000313 MD 2,526
San Adnres—-492 MD 3,331
San Andres-522 MD 3,381-492 MD 3,331
San Andres - High Flows, H2S, Co-541 MD 3,400—
Grayburg-691 MD 3,550-312 MD 3,151
Seven Rivers-1,111 MD 3,970583 MD 2,256
Glorieta-1,453 MD 4,312—
Clear Fork-1,538 MD 4,397—
Holt-2,141 MD 5,000—
Tubb-2,379 MD 5,238—
L Clearfork-2,426 MD 5,285—
Wichita-Albany-2,851 MD 5,710WICHITA ALBANY—
Wolfcamp-3,281 MD 6,140—
Wolfcamp Lime-3,842 MD 6,701—
Devonian-4,073 MD 6,932—
Silurian (undifferentiated)-4,414 MD 7,273SILURIAN—
McKee-5,269 MD 8,128—
Waddell-5,621 MD 8,480—
Connell-5,741 MD 8,600—
Ellenburger-5,851 MD 8,710—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.