TOOLS · CROSS-SECTION · TEXAS
2 wells, measured depth
West to east, 1.7 miles end to end. Shown in measured depth because not every well reports an elevation, so the columns are not datum-aligned. Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed; nothing is interpolated. Where tops come from →
shaded: a formation down to the next one filed in both wellsfiled in one well onlyhover a top or a name to pick out one formation
Tops by well
Measured depth, feet; a dash where the well has no top filed for the formation.
| Formation | ABell | BThomas-Wright |
|---|---|---|
| Coleman Junction | 2,580 | 2,650 |
| Coleman Junction | — | 2,650 |
| Tannehill | — | 3,200 |
| Gunsite | — | 3,500 |
| Cisco | — | 3,900 |
| Strawn | 4,200 | — |
| Canyon | — | 4,250 |
| Palo Pinto | — | 4,300 |
| Conglomerate | — | 6,500 |
| Bend | 5,916 | 6,550 |
| Clean Lime | — | 7,360 |
Add wells nearby
Only wells with a location on file can be found by distance; a well with tops but no location can still be added by name or API number.
The tops, as filed
ABell #1 42-155-30820
Abb Oil Co., Inc. · Foard · no elevation on file · 6,400 ft TD
| Formation | MD ft | Subsea |
|---|---|---|
| Coleman JunctionCOLEMAN JUNCTION - CORROSIVE | 2,580 | — |
| Strawn | 4,200 | — |
| BendBEND CONGLOMERATE | 5,916 | — |
BThomas-Wright #2 42-155-30812
Roberts & Hammack Inc. · Foard · 1,338 ft elevation · 7,800 ft TD
| Formation | MD ft | Subsea |
|---|---|---|
| Coleman JunctionCOLEMAN JUNCTION - CORROSIVE | 2,650 | -1,312 |
| Coleman Junction | 2,650 | -1,312 |
| Tannehill | 3,200 | -1,862 |
| Gunsite | 3,500 | -2,162 |
| Cisco | 3,900 | -2,562 |
| Canyon | 4,250 | -2,912 |
| Palo Pinto | 4,300 | -2,962 |
| Conglomerate | 6,500 | -5,162 |
| BendBEND CONGLOMERATE | 6,550 | -5,212 |
| Clean Lime | 7,360 | -6,022 |
About this data
Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.
New to these records? completion reports and the wellbore file
Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.