TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.5 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,586 FT ELB2,631 FT ELYatesYatesSeven RiversSeven RiversSan Andres - High Flows…San Andres - High Flows, H2S, CoClearforkClearforkSpraberrySpraberryLeonardLeonardDeanDean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AMay North 1482CP #1H
  • BMarcy #1WA
FormationAB
Santa Rosa1,686 MD 900—
Rustler1,031 MD 1,555—
Yates763 MD 1,823895 MD 1,736
Seven Rivers553 MD 2,033805 MD 1,826
San Andres - High Flows, H2S, Co-641 MD 3,227-475 MD 3,106SAN ANDRES - HIGH FLOWS, H2S, CO
San Andres - Active CO2 Flood; H-641 MD 3,227—
Glorieta—-979 MD 3,610
Clearfork-2,232 MD 4,818-1,762 MD 4,393CLEARFORK - SEVERE WATER FLOWS
Clearfork - Severe Water Flows-2,232 MD 4,818—
Spraberry-3,350 MD 5,936-3,266 MD 5,897
Leonard-4,171 MD 6,757-4,151 MD 6,782
Dean-4,515 MD 7,101-4,476 MD 7,107
Wolfcamp-4,545 MD 7,131—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.