TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.7 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000-8,000-10,000SUBSEA FTA2,733 FT ELB2,724 FT ELSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AGault, Sarah #105
  • BKeele 4 #1
FormationAB
Santa Rosa—1,736 MD 988
Rustler—1,051 MD 1,673
Yates—74 MD 2,650
Seven Rivers—-212 MD 2,936
Queen—-954 MD 3,678
Grayburg—-1,079 MD 3,803
San Andres—-1,583 MD 4,307SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta—-2,835 MD 5,559
Clear Fork—-4,047 MD 6,771
Spraberry-4,889 MD 7,622-4,883 MD 7,607
Dean-6,226 MD 8,959—
Wolfcamp-6,547 MD 9,280WOLFCAMP LIME—
Strawn-7,667 MD 10,400—
Strawn Lime-7,707 MD 10,440—
Bend-7,920 MD 10,653—
Atoka Shale-8,072 MD 10,805—
Atoka-8,132 MD 10,865—
Devonian-8,897 MD 11,630—
Silurian (undifferentiated)-9,341 MD 12,074SILURIAN—
Fusselman-9,481 MD 12,214—
Ellenburger-9,805 MD 12,538—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.