NORWAY · WELLBORES · NPDID 10097

7324/6-2

Exploration · Wildcat · P&A · Gas · Aker BP ASA · PL 1170

Core 1

Core 1 of 7324/6-2 was cut from 820 to 847.5 m, 27.5 m in the Fuglen Fm, Stø Fm, and Reke Mbr. The Directorate lists core samples from it as available.

27.5
m cored · 820 to 847.5
4
formation boundaries crossed
9
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS820847.5 m825830835840845Fuglen Fm, 820 to 828 mFuglen FmStø Fm, 828 to 840 mStø FmReke Mbr, 840 to 847.5 mReke MbrCore 1, 820 to 847.5 mCore 127.5 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Fuglen Fm8208288
Stø Fm82884012
Reke Mbr840847.57.5

Every formation top in 7324/6-2 →

Logs run across it

9 RUNS COVERING PART OF THE INTERVAL

  • CSNG GEM DSN SDL ALAT MSFLspectral density log · micro-spherically focused log455 to 1,278 m
  • LWD MWD - GR CAL PWD RES DEN NEUlogging while drilling · measurement while drilling · gamma ray · caliper · pressure while drilling · resistivity · density · neutron455 to 1,280 m
  • RDT DP XMR CSNG GEMreservoir description tool455 to 1,278 m
  • RDT EFS XLOreservoir description tool455 to 861 m
  • RDT EFS XLOreservoir description tool455 to 1,125 m
  • XRMI XSI CAST455 to 1,278 m
  • ZO VSPvertical seismic profile455 to 1,210 m
  • MF840 to 840 m
  • XRMI CAST840 to 840 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/10097/cores/1, documented in the API reference.