Core 2
Core 2 of 7324/6-2 was cut from 847.5 to 874.4 m, 26.9 m in the Reke Mbr and Akkar Mbr. The Directorate lists core samples from it as available.
- 26.9
- m cored · 847.5 to 874.4
- 1
- formation boundary crossed
- 7
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
Logs run across it
7 RUNS COVERING PART OF THE INTERVAL
- CSNG GEM DSN SDL ALAT MSFLspectral density log · micro-spherically focused log455 to 1,278 m
- LWD MWD - GR CAL PWD RES DEN NEUlogging while drilling · measurement while drilling · gamma ray · caliper · pressure while drilling · resistivity · density · neutron455 to 1,280 m
- RDT DP XMR CSNG GEMreservoir description tool455 to 1,278 m
- RDT EFS XLOreservoir description tool455 to 861 m
- RDT EFS XLOreservoir description tool455 to 1,125 m
- XRMI XSI CAST455 to 1,278 m
- ZO VSPvertical seismic profile455 to 1,210 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/10097/cores/2, documented in the API reference.