NORWAY · WELLBORES · NPDID 1026
31/4-9
Exploration · Appraisal · P&A · Oil · Norsk Hydro Produksjon AS · Brage · PL 055
Core 3
Core 3 of 31/4-9 was cut from 2,105 to 2,106.8 m, 1.8 m in the Draupne Fm. The Directorate lists core samples from it as available.
- 1.8
- m cored · 2,105 to 2,106.8
- 8
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Draupne Fm | 2,105 | 2,106.8 | 1.8 |
Logs run across it
8 RUNS COVERING PART OF THE INTERVAL
- MWD - GR RESmeasurement while drilling · gamma ray · resistivity181 to 2,480 m
- VSPvertical seismic profile360 to 2,466 m
- CBL CST VDL GRcement bond log · sidewall core sample taker · variable density log · gamma ray1,500 to 2,389 m
- DITE LDL CNL NGTphasor dual induction · litho-density log · compensated neutron log · natural gamma ray spectrometry1,998 to 2,471 m
- DLL MSFL SDT GRdual laterolog · micro-spherically focused log · digital sonic tool · gamma ray1,998 to 2,471 m
- SHDTstratigraphic high-resolution dipmeter1,998 to 2,474 m
- CSTsidewall core sample taker2,008 to 2,471 m
- RFTrepeat formation tester2,171 to 0 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/1026/cores/3, documented in the API reference.