NORWAY · WELLBORES · NPDID 1226
33/9-14
Exploration · Appraisal · P&A · Oil · Den norske stats oljeselskap a.s · Statfjord Nord · PL 037
Core 3
Core 3 of 33/9-14 was cut from 2,744 to 2,744.1 m, 0.1 m in the Draupne Fm. The Directorate lists core samples from it as available.
- 0.1
- m cored · 2,744 to 2,744.1
- 9
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Draupne Fm | 2,744 | 2,744.1 | 0.1 |
Logs run across it
9 RUNS COVERING PART OF THE INTERVAL
- CBLV GRgamma ray268 to 2,927 m
- VELOCITYvelocity (check-shot) survey1,000 to 2,960 m
- CDL CN SL GRcompensated densilog · compensated neutron · spectral gamma ray · gamma ray2,649 to 2,975 m
- DIFL ACL GR CALdual induction focused log · acoustic log · gamma ray · caliper2,649 to 2,975 m
- DIPLOGdipmeter2,649 to 2,975 m
- DLL MLL GRdual laterolog · microlaterolog · gamma ray2,665 to 2,800 m
- MWD - EWR GRmeasurement while drilling · electromagnetic wave resistivity · gamma ray2,666 to 2,879 m
- FMT GRformation multi-tester · gamma ray2,675 to 2,865 m
- SWCsidewall cores2,740 to 2,966 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/1226/cores/3, documented in the API reference.