6507/7-1

Exploration · Wildcat · P&A · Gas shows · Conoco Norway Inc. · PL 095

Everything taken from 6507/7-1 that the Directorate has on file, each with its depth and the formation that depth sits in by this wellbore's own tops. Open a core for its photographs, the thin sections and slides cut from it, and the tests across it.

Cores

6 CORES · 64.7 M IN ALL

Core	Top	Base	Depth in	In	Sample available
Core 1 →	3,504	3,512.7	m	Cromer Knoll Gp	Yes
Core 2 →	4,340	4,346.2	m	Ile Fm	Yes
Core 3 →	4,346.2	4,356.8	m	Ile Fm	Yes
Core 5 →	4,356.7	4,375.2	m	Ile Fm	Yes
Core 6 →	4,475	4,488.4	m	Ile Fm, Ror Fm	Yes
Core 7 →	4,593	4,600.4	m	Tilje Fm	Yes

Cored length by unit, m

The core log: every core down the well →Every core from PL 095 →

Core photos

112 PHOTOS OF 8 INTERVALS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE

Pick an interval to see the Directorate's photographs of the core, or open a core above for only its own. Each image loads from the Directorate's servers when you open it.

Drill-stem tests

Test	From, m	To, m	In	Choke, mm	Oil, Sm³/d	Gas, Sm³/d	Oil density, g/cm³	GOR, m³/m³	BHP, MPa	Temp, °C
DST 1	4,338	4,374	Ile Fm	12.7	0	30,000	—	—	64	—

Every drill-stem test on PL 095 →

Test reports and pressure plots on file

Formation pressure plotpdf · 270 KB

Cuttings

490 to 4,823 mSample available: yes

Thin sections

3 ON FILE · 3,504.2 TO 3,509.7 M

Section	Depth	In
1792	3,504.2 m	Cromer Knoll Gp
1793	3,507.3 m	Cromer Knoll Gp
1794	3,509.7 m	Cromer Knoll Gp

Palynology slides

166 ON FILE · 2,150 TO 4,301

Made from: Ditch cuttings 155, Core 11. Laboratory codes: OD 156, SAGA 10.

Depth	Made from	Lab code	In
2,150 m	Ditch cuttings	SAGA	Tang Fm
2,156 m	Ditch cuttings	SAGA	Tang Fm
2,159 m	Ditch cuttings	SAGA	Springar Fm
2,165 m	Ditch cuttings	SAGA	Springar Fm
2,852 m	Ditch cuttings	OD	Kvitnos Fm
2,861 m	Ditch cuttings	OD	Kvitnos Fm
2,870 m	Ditch cuttings	OD	Kvitnos Fm
2,882 m	Ditch cuttings	OD	Kvitnos Fm
2,891 m	Ditch cuttings	OD	Kvitnos Fm
2,900 m	Ditch cuttings	OD	Kvitnos Fm
2,900 m	Ditch cuttings	SAGA	Kvitnos Fm
2,909 m	Ditch cuttings	OD	Kvitnos Fm
2,915 m	Ditch cuttings	SAGA	Kvitnos Fm
2,921 m	Ditch cuttings	OD	Kvitnos Fm
2,930 m	Ditch cuttings	OD	Lysing Fm
2,939 m	Ditch cuttings	OD	Lysing Fm
2,951 m	Ditch cuttings	OD	Lysing Fm
2,960 m	Ditch cuttings	OD	Lysing Fm
2,969 m	Ditch cuttings	OD	Lysing Fm
2,981 m	Ditch cuttings	OD	Lysing Fm
2,990 m	Ditch cuttings	OD	Lysing Fm
3,002 m	Ditch cuttings	OD	Lange Fm
3,011 m	Ditch cuttings	OD	Lange Fm
3,020 m	Ditch cuttings	OD	Lange Fm
3,029 m	Ditch cuttings	OD	Lange Fm
3,041 m	Ditch cuttings	OD	Lange Fm
3,050 m	Ditch cuttings	OD	Lange Fm
3,062 m	Ditch cuttings	OD	Lange Fm
3,071 m	Ditch cuttings	OD	Lange Fm
3,080 m	Ditch cuttings	OD	Lange Fm
3,092 m	Ditch cuttings	OD	Lange Fm
3,101 m	Ditch cuttings	OD	Lange Fm
3,119 m	Ditch cuttings	OD	Lange Fm
3,131 m	Ditch cuttings	OD	Lange Fm
3,143 m	Ditch cuttings	OD	Lange Fm
3,152 m	Ditch cuttings	OD	Lange Fm
3,161 m	Ditch cuttings	OD	Lange Fm
3,170 m	Ditch cuttings	OD	Lange Fm
3,179 m	Ditch cuttings	OD	Lange Fm
3,191 m	Ditch cuttings	OD	Lange Fm

Seeing the material itself

The cores, cuttings, and thin sections listed here are physical samples held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling them by booking. There are no images of thin sections or slides online; core photographs are the only pictures the Directorate publishes.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Depths are metres along the wellbore from the kelly bushing unless a row gives its own unit; older cores are filed in feet. A core's photographs are the ones whose titled interval overlaps the core's. Reports are placed beside the material they are about by their document type and file name, which is all the Directorate publishes about them. The unit beside a core, sample, test, or slide is the one whose top and base, in this wellbore's own tops, contain that depth; core and test depths are driller's depths, so an interval at a boundary can sit a few metres off. A zero the Directorate files for an unmeasured pressure, density, or temperature is shown as a dash. Availability is the Directorate's flag, not a stock check. Core photographs are links to its own files; Petrora does not hold copies.

Developers: this page as JSON is GET /v1/data/norway/wells/138, documented in the API reference.