NORWAY · WELLBORES · NPDID 159
7/11-3
Exploration · Appraisal · P&A · Oil shows · Phillips Petroleum Company Norway · Cod · PL 018
Core 3
Core 3 of 7/11-3 was cut from 3,160.3 to 3,177.2 m, 17 m in the Forties Fm. The Directorate lists core samples from it as available.
- 17
- m cored · 3,160.3 to 3,177.2
- 1
- thin section in the interval
- 3
- palynology slides made from core
- 1
- test or fluid sample across it
- 10
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Forties Fm | 3,160.3 | 3,177.2 | 16.9 |
Thin sections in this interval
1 ON FILE
| Section | Depth | In |
|---|---|---|
| 742 | 10,423 ft | Forties Fm |
Palynology slides made from core
3 IN THE INTERVAL
| Depth | Lab code | In |
|---|---|---|
| 3,162.6 m | OD | Forties Fm |
| 3,166.3 m | OD | Forties Fm |
| 3,176 m | OD | Forties Fm |
Tests and fluid samples across it
- DST 43,161 to 3,173 mOil 0 Sm³/d · gas 0 Sm³/d
Logs run across it
10 RUNS COVERING PART OF THE INTERVAL
- SGRspectral gamma ray494 to 3,351 m
- VSPvertical seismic profile494 to 3,351 m
- CBLcement bond log1,951 to 3,292 m
- IESinduction electrical survey1,972 to 3,351 m
- SPspontaneous potential1,974 to 3,351 m
- CDM2,920 to 3,349 m
- FDCcompensated formation density2,927 to 3,351 m
- LL-7laterolog2,927 to 3,351 m
- MLLmicrolaterolog2,927 to 3,351 m
- SNPsidewall neutron porosity2,927 to 3,299 m
Core and petrography reports on file for the well
- Core laboratoriespdf · 809 KB
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/159/cores/3, documented in the API reference.