NORWAY · WELLBORES · NPDID 166

8/10-1

Exploration · Wildcat · P&A · Dry · Phillips Petroleum Company Norway · PL 017

5 documents: reports, logs, and plots →

What was run in 8/10-1 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

Logs you can open: composite and completion logs on file

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, mComposite log for the well
SONIC GR CALIPERSONIC sonic · GR gamma ray932,125On file: open →
SONIC CALIPERSONIC sonic6052,131On file: open →
CDM2,1253,042On file: open →
DIRDIR directional survey2,1253,017On file: open →
IELIEL induction electrical log2,1253,090On file: open →
SONIC CALIPERSONIC sonic2,1253,095On file: open →

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor20156261570LOT
Surf.cond.13 3/860617 1/26100LOT
Interm.9 5/82,12512 1/42,1260LOT
Open hole—3,0998 1/23,0990LOT

Drilling mud

6 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
6071.0200seawater
2,1331.555312seawater
2,5911.494712seawater
2,7131.555516seawater
3,0421.665819seawater
3,0971.725515seawater

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. The composite log is one file for the whole well. The Directorate does not say which runs or depths it draws on, so the link is the same on every row.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/166, documented in the API reference.