NORWAY · WELLBORES · NPDID 1868
7/7-2
Exploration · Wildcat · P&A · Oil · Den norske stats oljeselskap a.s · Brynhild · PL 148
Everything taken from 7/7-2 that the Directorate has on file, each with its depth and the formation that depth sits in by this wellbore's own tops. Open a core for its photographs, the thin sections and slides cut from it, and the tests across it.
Cores
5 CORES · 33.6 M IN ALL
| Core | Top | Base | Depth in | In | Photos | Sample available |
|---|---|---|---|---|---|---|
| Core 1 → | 3,242 | 3,243 | m | Mandal Fm | Yes | |
| Core 2 → | 3,243 | 3,246.5 | m | Mandal Fm | Yes | |
| Core 3 → | 3,338 | 3,348.6 | m | Ula Fm, Smith Bank Fm | Yes | |
| Core 4 → | 3,350 | 3,357.1 | m | Smith Bank Fm | Yes | |
| Core 5 → | 3,357 | 3,368.4 | m | Smith Bank Fm | Yes |
Cored length by unit, m
- Smith Bank Fm20.6
- Hegre Gp20.6
- Ula Fm8.5
- Vestland Gp8.5
- Mandal Fm4.5
- Tyne Gp4.5
The core log: every core down the well →Every core from Brynhild →
Core photos
8 PHOTOS OF 8 INTERVALS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
Pick an interval to see the Directorate's photographs of the core, or open a core above for only its own. Each image loads from the Directorate's servers when you open it.
Fluid samples
| Test | Fluid | From, m | To, m | In | Tested | Received | Sample available |
|---|---|---|---|---|---|---|---|
| DST TEST2 | — | 3,333 | 3,342 | Ula Fm | Apr 15, 1992 | May 2, 1992 | Yes |
Every fluid sample from Brynhild →
Geochemistry and fluid analysis on file
- Geochemical information 1pdf · 2.8 MB
Drill-stem tests
| Test | From, m | To, m | In | Choke, mm | Oil, Sm³/d | Gas, Sm³/d | Oil density, g/cm³ | GOR, m³/m³ | BHP, MPa | Temp, °C |
|---|---|---|---|---|---|---|---|---|---|---|
| DST 1 | 3,333 | 3,342 | Ula Fm | 9.5 | 787 | 15,740 | 0.877 | 20 | — | 80 |
Every drill-stem test in Brynhild →
Test reports and pressure plots on file
- Formation pressure plotpdf · 218 KB
Cuttings
- 910 to 3,422 mSample available: yes
Palynology slides
138 ON FILE · 1,350 TO 3,428
Made from: Ditch cuttings 119, Core 12, Sidewall core 7. Laboratory codes: MILL 120, STATO 18.
| Depth | Made from | Lab code | In |
|---|---|---|---|
| 1,350 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,370 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,380 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,390 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,400 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,430 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,440 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,460 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,470 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,490 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,500 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,520 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,530 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,550 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,560 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,580 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,590 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,610 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,620 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,640 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,650 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,670 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,680 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,690 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,710 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,730 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,740 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,760 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,770 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,790 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,800 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,820 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,830 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,850 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,860 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,880 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,890 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,910 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,920 m | Ditch cuttings | MILL | Hordaland Gp |
| 1,940 m | Ditch cuttings | MILL | Hordaland Gp |
Seeing the material itself
The cores, cuttings, and thin sections listed here are physical samples held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling them by booking. There are no images of thin sections or slides online; core photographs are the only pictures the Directorate publishes.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Depths are metres along the wellbore from the kelly bushing unless a row gives its own unit; older cores are filed in feet. A core's photographs are the ones whose titled interval overlaps the core's. Reports are placed beside the material they are about by their document type and file name, which is all the Directorate publishes about them. The unit beside a core, sample, test, or slide is the one whose top and base, in this wellbore's own tops, contain that depth; core and test depths are driller's depths, so an interval at a boundary can sit a few metres off. A zero the Directorate files for an unmeasured pressure, density, or temperature is shown as a dash. Availability is the Directorate's flag, not a stock check. Core photographs are links to its own files; Petrora does not hold copies.
Developers: this page as JSON is GET /v1/data/norway/wells/1868, documented in the API reference.