NORWAY · WELLBORES · NPDID 2517

34/10-38 S

Exploration · Appraisal · P&A · Oil/gas · Den norske stats oljeselskap a.s · Gullfaks Sør · PL 050

4 documents: reports, logs, and plots →

Core 2

Core 2 of 34/10-38 S was cut from 3,465 to 3,482.4 m, 17.4 m in the Statfjord Gp. The Directorate lists core samples from it as available.

17.4
m cored · 3,465 to 3,482.4
6
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS3,4653,482.4 m3,4663,4683,4703,4723,4743,4763,4783,480Statfjord Gp, 3,465 to 3,482.4 mStatfjord GpCore 2, 3,465 to 3,482.4 mCore 217.4 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Statfjord Gp3,4653,482.417.4

Every formation top in 34/10-38 S →

Logs run across it

6 RUNS COVERING PART OF THE INTERVAL

  • VSPvertical seismic profile1,805 to 3,930 m
  • DIPL MAC CN ZDL DSL TTRMmultipole array acoustic · compensated neutron · compensated Z-densilog · digital spectral gamma ray · temperature, tension, and mud resistivity2,060 to 3,847 m
  • MWD - DPRmeasurement while drilling · dual propagation resistivity2,075 to 3,940 m
  • HRDIP GRgamma ray2,965 to 3,940 m
  • SWC GRsidewall cores · gamma ray3,009 to 3,720 m
  • FMT QDYNE GR CHTformation multi-tester · gamma ray · cable head tension3,022 to 3,864 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/2517/cores/2, documented in the API reference.