NORWAY · WELLBORES · NPDID 262

2/7-3

Exploration · Wildcat · P&A · Oil/gas · Phillips Petroleum Company Norway · Eldfisk · PL 018

13 documents: reports, logs, and plots →

Core 3

Core 3 of 2/7-3 was cut from 9,431 to 9,472 ft, 41 ft in the Shetland Gp. The Directorate lists core samples from it as available.

41
ft cored · 9,431 to 9,472
2
tests and fluid samples across it
10
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 2,874.6 TO 2,887.1 M

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS9,4319,472 ft9,4359,4409,4459,4509,4559,4609,4659,470Shetland Gp, 2,874.6 to 2,887.1 mShetland GpCore 3, 9,431 to 9,472 ftCore 341 ft2.4 m not cored

What it was cut through

UnitFrom, mTo, mCore in it, m
Shetland Gp2,874.62,887.112.5

Every formation top in 2/7-3 →

Tests and fluid samples across it

  • DST 32,883 to 2,896 mOil 667 Sm³/d · gas 133,089 Sm³/d
  • DST 42,868 to 2,877 mOil 792 Sm³/d · gas 167,069 Sm³/d

Full test results for the well →

Logs run across it

10 RUNS COVERING PART OF THE INTERVAL

  • BHCborehole-compensated sonic436 to 4,318 m
  • IESinduction electrical survey480 to 4,315 m
  • VELOCITYvelocity (check-shot) survey488 to 4,359 m
  • CBLcement bond log2,438 to 2,958 m
  • CBLcement bond log2,438 to 3,048 m
  • CDM2,682 to 4,191 m
  • DLLdual laterolog2,682 to 4,191 m
  • FDCcompensated formation density2,682 to 4,191 m
  • MLLmicrolaterolog2,682 to 4,197 m
  • SNPsidewall neutron porosity2,682 to 4,176 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/262/cores/3, documented in the API reference.