NORWAY · WELLBORES · NPDID 2728

25/10-6 S

Exploration · Wildcat · P&A · Shows · Den norske stats oljeselskap a.s · PL 168

5 documents: reports, logs, and plots →

25/10-6 S was cored 3 times, 12.5 m in all between 4,339.2 and 4,399.7 m.

3
cores
12.5
metres cored in all
3
photographs of 3 cores
13
palynology slides made from core

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Core log

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS4,339.24,343.5Hugin Fm, 4,339.2 to 4,343.5 mHugin FmCore 1, 4,339.2 to 4,343.5 m. Open the core.Core 14.4 m4,339 to 4,343 m: 1 photo. Open.14,349.5Hugin Fm, 4,344 to 4,349.5 mHugin FmCore 2, 4,344 to 4,349.5 m. Open the core.Core 25.5 m4,344 to 4,349 m: 1 photo. Open.147.6 m not cored4,3974,399.7 mHugin Fm, 4,397 to 4,399.7 mHugin FmCore 3, 4,397 to 4,399.7 m. Open the core.Core 32.7 m4,349 to 4,399 m: 1 photo. Open.1

Core by core

CoreTopBaseLengthInPhotosThin sectionsSlides from coreTestsSample available
Core 1 →4,339.2 m4,343.5 m4.4Hugin Fm—3—Yes
Core 2 →4,344 m4,349.5 m5.5Hugin Fm—4—Yes
Core 3 →4,397 m4,399.7 m2.7Hugin Fm—6—Yes

Seeing the cores themselves

The cores are held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files each core as an interval and nothing against it. The log places everything else on file for the wellbore inside the core whose interval contains its depth: photographs by the interval in their title, thin sections and slides by their depth, tests by overlap, formations by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge of a core can belong to its neighbor. Only slides made from core are shown; slides from cuttings at the same depths are on the Samples tab.

Developers: this page as JSON is GET /v1/data/norway/wells/2728/cores, documented in the API reference.