NORWAY · WELLBORES · NPDID 2783

35/10-2

Exploration · Wildcat · P&A · Gas · Den norske stats oljeselskap a.s · PL 173

3 documents: reports, logs, and plots →

Core 1

Core 1 of 35/10-2 was cut from 1,960 to 1,966.5 m, 6.5 m in the Sele Fm and Lista Fm. The Directorate lists core samples from it as available.

6.5
m cored · 1,960 to 1,966.5
2
photographs
1
formation boundary crossed
6
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS1,9601,966.5 m1,9621,964Sele Fm, 1,960 to 1,963 mSele FmLista Fm, 1,963 to 1,966.5 mLista FmCore 1, 1,960 to 1,966.5 mCore 16.5 m1,960 to 1,965 m: 1 photo. Open.11,965 to 1,966 m: 1 photo. Open.1

Photographs of this core

2 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE

What it was cut through

UnitFrom, mTo, mCore in it, m
Sele Fm1,9601,9633
Lista Fm1,9631,966.53.5

Every formation top in 35/10-2 →

Logs run across it

6 RUNS COVERING PART OF THE INTERVAL

  • MWD - DPRmeasurement while drilling · dual propagation resistivity483 to 4,579 m
  • VSP GRvertical seismic profile · gamma ray640 to 3,440 m
  • DLL MAC CNL ZDL SLdual laterolog · multipole array acoustic · compensated neutron log · compensated Z-densilog · spectral gamma ray1,452 to 3,450 m
  • SWC GRsidewall cores · gamma ray1,950 to 2,034 m
  • FMT QDYNE GRformation multi-tester · gamma ray4,199 to 0 m
  • FMT QDYNE GRformation multi-tester · gamma ray4,199 to 0 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/2783/cores/1, documented in the API reference.