NORWAY · WELLBORES · NPDID 3008

2/8-16 S

Exploration · Wildcat · Junked · Not applicable · Amoco Norway Oil Company · PL 006

2 documents: reports, logs, and plots →

What was run in 2/8-16 S and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

Logs you can open: composite and completion logs on file

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
FEMWD - DIRDIR directional survey3791,475
FEMWD DGPSF - DIR GR RESDIR directional survey · GR gamma ray · RES resistivity1,4292,013
FEMWD DGPSF - DIR GR RESDIR directional survey · GR gamma ray · RES resistivity2,0133,125

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Surf.cond.20376263700LOT
Interm.161,429181,4300LOT
Open hole—3,1398 1/23,1390LOT

Drilling mud

9 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
3691.37280Oil based
6001.43390Oil based
1,1001.43390Oil based
1,4291.76230Oil based
1,4371.43400Oil based
1,9271.76220Oil based
2,0131.76220Oil based
2,9641.74220Oil based
3,1391.76230Oil based

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/3008, documented in the API reference.