NORWAY · WELLBORES · NPDID 3131
6507/7-11 S
Exploration · Wildcat · P&A · Dry · Conoco Norway Inc. · PL 095
Core 1
Core 1 of 6507/7-11 S was cut from 3,461 to 3,487.8 m, 26.8 m in the Garn Fm and Not Fm. The Directorate lists core samples from it as available.
- 26.8
- m cored · 3,461 to 3,487.8
- 6
- photographs
- 1
- formation boundary crossed
- 6
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
Photographs of this core
6 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
What it was cut through
Logs run across it
6 RUNS COVERING PART OF THE INTERVAL
- ZOVSP GRzero-offset vertical seismic profile · gamma ray2,400 to 3,740 m
- DSI GR AMSdipole shear sonic imager · gamma ray · auxiliary measurement sonde3,357 to 3,750 m
- FMI GR ACTSformation micro-imager · gamma ray · auxiliary compression and tension sub3,357 to 3,750 m
- LDT APS HNGS AIT ACTSlitho-density tool · accelerator porosity sonde · spectral gamma ray (hostile environment) · array induction tool · auxiliary compression and tension sub3,357 to 3,750 m
- MWD - DGR EWR-P4 SLD SNPmeasurement while drilling · dual gamma ray · electromagnetic wave resistivity · stabilized litho-density · sidewall neutron porosity3,365 to 3,749 m
- MDT GR ACTSmodular formation dynamics tester · gamma ray · auxiliary compression and tension sub3,458 to 3,739 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/3131/cores/1, documented in the API reference.