NORWAY · WELLBORES · NPDID 361

25/4-3

Exploration · Wildcat · P&A · Oil/gas · Elf Petroleum Norge AS · Alvheim · PL 036

5 documents: reports, logs, and plots →

Core 2

Core 2 of 25/4-3 was cut from 2,133 to 2,135 m, 2 m in the Heimdal Fm. The Directorate lists core samples from it as available.

2
m cored · 2,133 to 2,135
8
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,1332,135 mHeimdal Fm, 2,133 to 2,135 mHeimdal FmCore 2, 2,133 to 2,135 mCore 22 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Heimdal Fm2,1332,1352

Every formation top in 25/4-3 →

Logs run across it

8 RUNS COVERING PART OF THE INTERVAL

  • VELOCITYvelocity (check-shot) survey451 to 2,710 m
  • DLL MSFLdual laterolog · micro-spherically focused log1,960 to 2,713 m
  • GR SLgamma ray · spectral gamma ray1,960 to 2,713 m
  • HDThigh-resolution dipmeter1,960 to 2,713 m
  • IESinduction electrical survey1,960 to 2,713 m
  • ML MLLmicrolog · microlaterolog1,960 to 2,713 m
  • SNP GRsidewall neutron porosity · gamma ray1,960 to 2,713 m
  • FDC CNL GRcompensated formation density · compensated neutron log · gamma ray2,086 to 2,158 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/361/cores/2, documented in the API reference.