NORWAY · WELLBORES · NPDID 374

25/12-1

Exploration · Wildcat · P&A · Dry · A/S Norske Shell · PL 010

7 documents: reports, logs, and plots →

What was run in 25/12-1 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

Logs you can open: composite and completion logs on file

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, mComposite log for the well
BHC GRBHC borehole-compensated sonic · GR gamma ray136456On file: open →
VSPVSP vertical seismic profile1832,864On file: open →
IESIES induction electrical survey4562,864On file: open →
BHC GRBHC borehole-compensated sonic · GR gamma ray1,3572,864On file: open →
CNL FDCCNL compensated neutron log · FDC compensated formation density1,3572,864On file: open →
HDTHDT high-resolution dipmeter1,3572,864On file: open →
CSTCST sidewall core sample taker1,9962,850On file: open →

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor30244362500LOT
Surf.cond.20456264600LOT
Interm.13 3/81,35617 1/21,3600LOT
Interm.9 5/81,97812 1/41,9800LOT
Open hole—2,8658 1/22,8650LOT

Drilling mud

5 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
3751.1750spud mud
7711.1430spud mud
1,2081.15400spud mud
2,4721.25530mixed mud
2,8641.24520mixed mud

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. The composite log is one file for the whole well. The Directorate does not say which runs or depths it draws on, so the link is the same on every row.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/374, documented in the API reference.