NORWAY · WELLBORES · NPDID 3756
6507/5-2
Exploration · Appraisal · P&A · Gas/condensate · Amoco Norway Oil Company · Skarv · PL 212
Core 2
Core 2 of 6507/5-2 was cut from 3,684.8 to 3,743.8 m, 59 m in the Not Fm, Ile Fm, and Ror Fm. The Directorate lists core samples from it as available.
- 59
- m cored · 3,684.8 to 3,743.8
- 12
- photographs
- 8
- palynology slides made from core
- 3
- formation boundaries crossed
- 7
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
Photographs of this core
12 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
What it was cut through
Palynology slides made from core
8 IN THE INTERVAL
Logs run across it
7 RUNS COVERING PART OF THE INTERVAL
- VSPvertical seismic profile988 to 3,880 m
- MDTmodular formation dynamics tester2,813 to 3,864 m
- ARI DSI MSFL GPIT ACTSdipole shear sonic imager · micro-spherically focused log · inclinometry tool · auxiliary compression and tension sub3,550 to 3,897 m
- IPLT3,565 to 3,890 m
- ARI DSI MSFL EMS GPIT ACTSdipole shear sonic imager · micro-spherically focused log · environmental measurement sonde · inclinometry tool · auxiliary compression and tension sub3,600 to 3,901 m
- MWD - RABmeasurement while drilling · resistivity at the bit3,623 to 3,730 m
- MWD - DIR RABmeasurement while drilling · directional survey · resistivity at the bit3,730 to 3,897 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/3756/cores/2, documented in the API reference.