NORWAY · WELLBORES · NPDID 38

15/6-6

Exploration · Appraisal · P&A · Gas/condensate · Esso Exploration and Production Norway A/S · Sleipner Vest · PL 029

5 documents: reports, logs, and plots →

Core 2

Core 2 of 15/6-6 was cut from 3,609.5 to 3,625.5 m, 16 m in the Hugin Fm and Sleipner Fm. The Directorate lists core samples from it as available.

16
m cored · 3,609.5 to 3,625.5
1
formation boundary crossed
7
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS3,609.53,625.5 m3,6123,6143,6163,6183,6203,6223,624Hugin Fm, 3,609.5 to 3,621 mHugin FmSleipner Fm, 3,621 to 3,625.5 mSleipner FmCore 2, 3,609.5 to 3,625.5 mCore 216 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Hugin Fm3,609.53,62111.5
Sleipner Fm3,6213,625.54.5

Every formation top in 15/6-6 →

Logs run across it

7 RUNS COVERING PART OF THE INTERVAL

  • IEL BHC AC GR SPinduction electrical log · borehole-compensated sonic · acoustic (sonic) · gamma ray · spontaneous potential190 to 3,753 m
  • VSPvertical seismic profile1,800 to 3,748 m
  • AC CBLacoustic (sonic) · cement bond log2,446 to 3,630 m
  • CDL CNL GRcompensated densilog · compensated neutron log · gamma ray2,763 to 3,754 m
  • DIPLOGdipmeter2,773 to 3,749 m
  • DLL MLLdual laterolog · microlaterolog3,500 to 3,750 m
  • TEMPtemperature3,569 to 3,716 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/38/cores/2, documented in the API reference.