15/6-6

Exploration · Appraisal · P&A · Gas/condensate · Esso Exploration and Production Norway A/S · Sleipner Vest · PL 029

Everything taken from 15/6-6 that the Directorate has on file, each with its depth and the formation that depth sits in by this wellbore's own tops. Open a core for its photographs, the thin sections and slides cut from it, and the tests across it.

Cores

3 CORES · 53.4 M IN ALL

Core	Top	Base	Depth in	In	Photos	Sample available
Core 1 →	3,591	3,609.5	m	Hugin Fm	—	Yes
Core 2 →	3,609.5	3,625.5	m	Hugin Fm, Sleipner Fm	—	Yes
Core 3 →	3,625.5	3,644.4	m	Sleipner Fm	—	Yes

Cored length by unit, m

The core log: every core down the well →Every core from Sleipner Vest →

Drill-stem tests

Test	From, m	To, m	In	Choke, mm	Oil, Sm³/d	Gas, Sm³/d	Oil density, g/cm³	GOR, m³/m³	BHP, MPa	Temp, °C
DST 1	3,568	3,578	Hugin Fm	22.2	278	835,000	0.793	3,003	—	—

Every drill-stem test in Sleipner Vest →

Test reports and pressure plots on file

Formation pressure plotpdf · 227 KB

Cuttings

210 to 3,760 mSample available: yes

Palynology slides

155 ON FILE · 500 TO 3,751

Made from: Ditch cuttings 132, Sidewall core 23. Laboratory codes: none given 155.

Depth	Made from	Lab code	In
500 m	Ditch cuttings	—	Nordland Gp
530 m	Ditch cuttings	—	Nordland Gp
560 m	Ditch cuttings	—	Nordland Gp
590 m	Ditch cuttings	—	Nordland Gp
620 m	Ditch cuttings	—	Nordland Gp
650 m	Ditch cuttings	—	Nordland Gp
690 m	Ditch cuttings	—	Nordland Gp
710 m	Ditch cuttings	—	Nordland Gp
740 m	Ditch cuttings	—	Nordland Gp
770 m	Ditch cuttings	—	Nordland Gp
800 m	Ditch cuttings	—	Nordland Gp
830 m	Ditch cuttings	—	Utsira Fm
860 m	Ditch cuttings	—	Utsira Fm
890 m	Ditch cuttings	—	Utsira Fm
920 m	Ditch cuttings	—	Utsira Fm
950 m	Ditch cuttings	—	Utsira Fm
980 m	Ditch cuttings	—	Utsira Fm
1,010 m	Ditch cuttings	—	Utsira Fm
1,040 m	Ditch cuttings	—	Utsira Fm
1,070 m	Ditch cuttings	—	Hordaland Gp
1,100 m	Ditch cuttings	—	Hordaland Gp
1,130 m	Ditch cuttings	—	Hordaland Gp
1,160 m	Ditch cuttings	—	Skade Fm
1,190 m	Ditch cuttings	—	Skade Fm
1,220 m	Ditch cuttings	—	Hordaland Gp
1,250 m	Ditch cuttings	—	Hordaland Gp
1,280 m	Ditch cuttings	—	Hordaland Gp
1,310 m	Ditch cuttings	—	Hordaland Gp
1,340 m	Ditch cuttings	—	Hordaland Gp
1,370 m	Ditch cuttings	—	Hordaland Gp
1,400 m	Ditch cuttings	—	Hordaland Gp
1,430 m	Ditch cuttings	—	Hordaland Gp
1,460 m	Ditch cuttings	—	Hordaland Gp
1,490 m	Ditch cuttings	—	Hordaland Gp
1,520 m	Ditch cuttings	—	Hordaland Gp
1,550 m	Ditch cuttings	—	Hordaland Gp
1,580 m	Ditch cuttings	—	Hordaland Gp
1,610 m	Ditch cuttings	—	Hordaland Gp
1,640 m	Ditch cuttings	—	Hordaland Gp
1,670 m	Ditch cuttings	—	Hordaland Gp

Seeing the material itself

The cores, cuttings, and thin sections listed here are physical samples held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling them by booking. There are no images of thin sections or slides online; core photographs are the only pictures the Directorate publishes.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Depths are metres along the wellbore from the kelly bushing unless a row gives its own unit; older cores are filed in feet. A core's photographs are the ones whose titled interval overlaps the core's. Reports are placed beside the material they are about by their document type and file name, which is all the Directorate publishes about them. The unit beside a core, sample, test, or slide is the one whose top and base, in this wellbore's own tops, contain that depth; core and test depths are driller's depths, so an interval at a boundary can sit a few metres off. A zero the Directorate files for an unmeasured pressure, density, or temperature is shown as a dash. Availability is the Directorate's flag, not a stock check. Core photographs are links to its own files; Petrora does not hold copies.

Developers: this page as JSON is GET /v1/data/norway/wells/38, documented in the API reference.