NORWAY · WELLBORES · NPDID 4214

34/7-31

Exploration · Appraisal · P&A · Oil · Norsk Hydro Produksjon AS · PL 089

4 documents: reports, logs, and plots →

Core 2

Core 2 of 34/7-31 was cut from 2,499.3 to 2,505.7 m, 6.4 m in the Intra Draupne Fm Ss. The Directorate lists core samples from it as available.

6.4
m cored · 2,499.3 to 2,505.7
5
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,499.32,505.7 m2,5002,5022,504Intra Draupne Fm Ss, 2,499.3 to 2,505.7 mCore 2, 2,499.3 to 2,505.7 mCore 26.4 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Intra Draupne Fm Ss2,499.32,505.76.4

Every formation top in 34/7-31 →

Logs run across it

5 RUNS COVERING PART OF THE INTERVAL

  • MWD - GR RES DIRmeasurement while drilling · gamma ray · resistivity · directional survey233 to 2,650 m
  • VSPvertical seismic profile1,690 to 2,620 m
  • PEX DSI VSPPlatform Express (resistivity, density, neutron) · dipole shear sonic imager · vertical seismic profile1,700 to 2,627 m
  • MSCTmechanical sidewall coring tool1,840 to 2,641 m
  • MDTmodular formation dynamics tester1,842 to 2,618 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/4214/cores/2, documented in the API reference.